connect acer laptop to projector using hdmi

If it does not, please follow the instructions below that pertain your laptop's operating system. After your desktop has loaded, your laptop image should project. In DCS rooms where the VGA and HDMI cables are not attached to the system, you will need to connect the other end of this cable to the system jack. If you are using a HDMI or VGA adapter, plug the adapter into your laptop and connect the provided cable to the other end of the adapter. Connect the VGA or HDMI cable to your laptop's VGA or HDMI port.Turn on the system and select the appropriate button for laptop.Click on 'Yes' to accept my comment as answer. Now press and hold Windows + P then select duplicate to check if you get the display. If your laptop does not have a VGA or HDMI port, you will need to purchase an adapter that allows you to connect one of these two cables to your laptop. Connect the Laptop and Projector using HDMI, then change the Source on the projector to HDMI.

Newer laptops may not have a VGA or HDMI port. When the computer and projector are powered on and connected, both should display the same image, although many times the laptop will need to be mirrored. To see if your room also has a VGA input, click on 'Classroom Features' and check 'Additional Items.' To see if your classroom has a data projector, search for the room and click on the 'Technology' tab. The VGA port on a laptop consists of three rows of five holes. Some older systems may also have a VGA cable that may be used to connect a laptop to the projector. Videoconference, Streaming, & Recording SupportĪll classrooms equipped with the Digital Classroom Systems have HDMI inputs that may also be used to project from laptops.Teaching in an Immersive Synchronous Lecture Hall.

Connect acer laptop to projector using hdmi